Click image to view full size image
KIXIO Electric chain hoist with motorized trolley
1. Motor cover
Electric Chain hoist another name Electric Hoist or Chain Hoist. It is typical of unique optimal structure in shortening the distance between the machine body and the beam tracks, applicable to operations in side fairy low buildings, especially suitable for use in temporarily erected plant buildings or on the sites where expansion of effective hoisting spaces inside the buildings is required the Most important parts of the Machine is Chain and brake system. Detail as Detail Description.
Detail Description as follows:
1. Motor cover
It made of high strength and light aluminum alloy but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
2. Inverse phase sequence protecting device:
It is the special electrical installation, which control the circuit not to work in case of wiring error in the power supply.
3. Limit switch:
The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
4. 24V/36V device:
It is used to prohibit the emergencies from occurring in case of the leakage in the switch.
5. Side magnetic braking device:
This device shall realize the instant brake in case of the power dump.
6. Chain bag:
It shall be light, handsome and durable.
7. Chain:
The chain shall be adopted the imported FEC80 ultra heat-treatable steel alloy.
8. ISO: M5/FEM:
2AM, insulation grade: F, protection class(hoist and push button):IP65
| Technical Specification | |||||
| 3t Electric Chain Hoist With Electric Trolley _ KSN03-01E | |||||
| Type | KSN1.5-01E | KSN02-01E | KSN2.5-01E | KSN03-01E | |
| Capacity(t) | 1.5 | 2 | 2.5 | 3 | |
| Standard Lifting Height(m) | 3 | 3 | 3 | 3 | |
| Lifting Speed(m/min) | 8.8 | 6.6 | 5.4 | 5.4 | |
| Lifting Motor | Power(kw) | 3 | 3 | 3 | 3 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Phases | 3 | 3 | 3 | 3 | |
| Voltage(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Operating Motor | Power(kw) | 0.4 | 0.4 | 0.75 | 0.75 |
| Rotation Speed(r/min) | 1440 | 1440 | 1440 | 1440 | |
| Operating Speed(m/min) | 11/21 | 11/21 | 11/21 | 11/21 | |
| Phases | 3 | 3 | 3 | 3 | |
| Volatge(v) | 200-660 | 200-660 | 200-660 | 200-660 | |
| Frequency(Hz) | 50/60 | 50/60 | 50/60 | 50/60 | |
| Chain Turns | 1 | 1 | 1 | 1 | |
| Chain Specification | Ø10.0 | Ø10.0 | Ø11.2 | Ø11.2 | |
| Test Load(t) | 1.875 | 2.5 | 3.125 | 3.75 | |
| Weight(kg) | 108 | 115 | 116 | 122 | |
| I-Beam(mm) | 82-178 | 82-178 | 100-178 | 100-178 | |
| Weight Added with 1m Higher(kg) | 2.3 | 2.3 | 2.8 | 2.8 | |
What else you can get from us?
| *Electric Chain Hoist |
| *Wire Rope Hoist |
| *Crane & Crane Components |
| *Chain Block |
| *Lever Block |
| *Manual Trolley |
| *Wire Rope Pulling Hoist |
| *Hand Winch |
| *Permanent Magnetic Lifter |
| *Jack & Scale |
| *Plate & Drum Clamp |